RaeNard.com

Table of Contents

1. Summary
2. Getting Ready
   • Materials
   • Tools
3. Pipe Cutting
4. Hole Drilling
5. Assembly
6. Finishing Touches

Finishing touches

Use the 1/2" braided rope and wrap the top part of the stand. If you keep the wrap tight and make about 17 turns for each support, you will have just enough rope for both stands.

Use thread lock on the nut and bolt to prevent the bolt from loosening and falling off.

I decided to glue all the T-Joints and caps to prevent them from falling off while moving the stands.